Working principle of scrap iron crusher

Working principle of scrap iron crusher

Iron Scrap Metal Double Shaft Crusher is a kind of impact-type scrap iron crushing processing equipment. In the production line configuration,the scrap iron crushing production line consists of feeding conveying, scrap iron crusher,discharging conveying,sorting system,dust removal system,soundproof and explosion-proof room,electric control.The system composition can be used for paint removal,impurity removal, crushing and kneading of all kinds of scrap steel,which is called scrap iron recycling production line.Double Shaft Iron Scrap Crusher is suitable for scrap metal such as baled metal,briquetting metal,compressed metal,scrap alloy,waste,paint bucket,oil bucket,gasoline bucket,tin bucket,thin iron,metal bucket,metal can, color steel tile,Rolling gates,waste templates,metal cabinets,safes,filing cabinets,motor casings,oil filters, metal waste,scraps,scraps,scrap iron,scrap steel and other materials,the crushing method is novel and simple,and the finished product The size is uniform,the separation state is good,and it is convenient for post-processing.Precision Iron Scrap Shredder Machine is widely used in metal product factories,metal processing factories,waste recycling stations,metal recycling companies,steel mills,metallurgy,smelting,and other industries.

Working principle of  Iron Scrap Metal Double Shaft Crusher:In the working process of Double Shaft Iron Scrap Crusher,the material is sent into the sliding material bin of the equipment through the feeding conveyor configured by the equipment,and the material is evenly sent into the main machine of the equipment through forced pressure roller extrusion and material shifting system In the cavity,during the high-speed rotation of the main shaft,the material is primary crushed by the impact of the hammer head, and the crushed material is kneaded into spherical metal particles by the high-speed impact of the roller press in the machine cavity.The Precision Iron Scrap SHREDDER Machine that meets the discharge standard is discharged out of the machine cavity through the bottom screen, and the discharged finished product raw materials are sent to the sorting system through the discharge conveying to sort the impurities, scrap iron, scrap copper, and scrap in the scrap metal to obtain high-quality materials. The raw materials of the ingredients are used for secondary metallurgical processing.

The matters needing attention during the installation of the Double Shaft Iron Scrap Crusher are as follows: 1.Choose a suitable site before installation,consider the lifting problem during installation and whether it is convenient for maintenance in the future.2.After the site is selected, the ground must be poured with concrete.It is necessary to ensure that the load-bearing capacity of the ground is 5 to 10 times the weight of the crusher itself.3.After installation,check whether the parts of the equipment are missing,whether the screws are loose,etc.4.Check the wiring and fastening of the electrical box of the crusher,adjust the delay relay and overload protector, connect the circuit,test the motor steering,and select a fuse of appropriate specifications.5.After completing these inspections,perform a testing machine,first turn on the switch to see if the Iron Scrap Metal Double Shaft Crusher can operate normally,make sure there is no problem,and then put the material into further operation.